Issue Date | Title | Author(s) |
Nov-2009 | Cure kinetics of vapor grown carbon nanofiber (VGCNF) modified epoxy resin suspensions and fracture toughness of their resulting nanocomposites | Seyhan, Abdullah Tuğrul; Sun, Z.; Deitzel, J.; Tanoğlu, Metin ; Heider, D. |
2010 | Çapraz-kama haddeleme prosesinin teknik özelliklerinin Türk ve Belarus endüstrileri için detaylandırılması | Güden, Mustafa ; Yardımoğlu, Bülent ; Çakırcalı, Metin; Kılıçaslan, Cenk |
2007 | Çok katmanlı malzemelerde gerilme dalga geçişi | Güden, Mustafa ; Taşdemirci, Alper |
2005 | Çoklu alüminyum kapalı hücreli köpük dolu alüminyum ve polimerik kompozit tüplerin ezilme davranışlarının belirlenmesi | Güden, Mustafa ; Tanoğlu, Metin ; Kavi, Halit ; Yüksel, Sinan |
12-May-2023 | Database covering the prayer movements which were not available previously | Mihçin, Şenay ; Şahin, Ahmet Mert; Yılmaz, Mehmet; Alpkaya, Alican Tuncay ; Tuna, Merve; Akdeniz, Sevinç; Can, Nuray Korkmaz; Tosun, Aliye; Şahin, Serap |
14-May-2023 | Database covering the previously excluded daily life activities | Mihçin, Şenay ; Şahin, Ahmet Mert; Yılmaz, Mehmet; Alpkaya, Alican Tuncay ; Tuna, Merve; Can, Nuray Korkmaz; Şahin, Serap ; Akdeniz, Sevinç; Tosun, Aliye |
May-2017 | Densification and characterization of rapid carbothermal synthesized boron carbide | Toksoy, Muhammet Fatih ; Rafaniello, William; Xie, Kelvin Yu; Ma, Luoning; Hemker, Kevin Jude; Haber, Richard Alan |
2014 | Derivation of input/output relationships for the Bennett 6R linkages based on the method of decomposition | Alizade, Rasim ; Kiper, Gökhan ; Dede, Mehmet İsmet Can ; Uzunoğlu, Emre |
Jun-2017 | Design alternatives of network of Altmann linkages | Atarer, Fulya ; Korkmaz, Koray ; Kiper, Gökhan |
2014 | Design and analysis of a parallel mechanism for kinematically redundant hybrid planar laser cutting machine | Dede, Mehmet İsmet Can ; Gezgin, Erkin; Kiper, Gökhan ; Mastar, Ercan; Sığırtmaç, Tayfun; Uzunoğlu, Emre |
2023 | Design and balancing of a novel 2R1T manipulator with remote center of motion | Yılmaz, Tuğrul; Kiper, Gökhan |
Mar-2017 | Design and development of an educational desktop robot R3D | Şahin, Osman Nuri ; Uzunoğlu, Emre ; Tatlıcıoğlu, Enver ; Dede, Mehmet İsmet Can |
2018 | Design and experimental validation of an MR-fluid based brake for use in haptics | Karabulut, Mehmet Görkem ; Dede, Mehmet İsmet Can |
2012 | Design and fatigue life comparison of steel and composite leaf spring | Soner, Murathan; Tanoğlu, Metin ; Güven, Nilay; Karaağaç, Mustafa; Akyalı, Rasim; Aksoy, Özay; Erdoğuş, Tolga; Kanpolat, Ahmet |
2024 | The design and kinematic representation of a soft robot in a simulation environment | Emet, Hazal ; Gür, Berke; Dede, Mehmet İsmet Can |
2023 | Design and manufacturing of a hip joint motion simulator with a novel modular design approach | Torabnia, Shams; Mihçin, Şenay ; Lazoğlu, İsmail |
2017 | Design and optimization of fiber composites | Aydın, Levent; Artem, Hatice Seçil |
Sep-2009 | Design and prototype of mobile robots for rescue operations | Keçeci, Emin Faruk |
6-Jun-2018 | Design and simulation of a novel hybrid leg mechanism for walking machines | Demirel, Murat ; Carbone, Giuseppe; Ceccarelli, Marco; Kiper, Gökhan |
Nov-2016 | Design and testing of an innovative cleaning tool for underwater applications | Gündoğdu, Hilal Tolasa; Dede, Mehmet İsmet Can ; Taner, Barış; Ridolfi, Alessandro; Costanzi, Riccardo; Allotta, Benedetto |
2017 | Design of a cable-driven four-bar mechanism for arm rehabilitation | Eraz, Talha ; Kiper, Gökhan |
2009 | Design of a haptic device for teleoperation and virtual reality systems | Dede, Mehmet İsmet Can ; Selvi, Özgün; Bilgincan, Tunç ; Kant, Yalkın |
Feb-2023 | Design of a novel hybrid cable-constrained parallel leg mechanism for biped walking machines | Demirel, Murat ; Kiper, Gökhan ; Carbone, Giuseppe; Ceccarelli, Marco |
24-Nov-2014 | Design of a reconfigurable deployable structure | Gürcü, Fulya; Korkmaz, Koray ; Kiper, Gökhan |
2010 | Design of a six degree-of-freedom haptic hybrid platform manipultor | Bilgincan, Tunç |
2019 | Design of a teleoperation scheme with a wearable master for minimally invasive surgery | Ateş, Gizem ; Majani, Ronny; Dede, Mehmet İsmet Can |
2019 | Design of anti-parallelogram loop assemblies | Gür, Şebnem ; Korkmaz, Koray ; Kiper, Gökhan |
Sep-2022 | Design of demountable reciprocal frames with new geometric properties | Özen, Gülçin; Kiper, Gökhan ; Korkmaz, Koray |
2019 | Design of dimensionally stable composites using efficient global optimization method | Aydın, Levent; Aydın, Olgun; Artem, Hatice Seçil ; Mert, Ali |
Jul-2018 | Design of hybrid cable-constrained parallel mechanisms for walking machines | Demirel, Murat |
Dec-2021 | Design, prototyping and tests of a rollable ramp for temporary use | Doğan Kumtepe, Elvan; Kiper, Gökhan |
Jul-2020 | Desing and production of light-weight pressure resistant composite tank materials and systems for hydrogen storage | Kartav, Osman |
2022 | Detailed investigation of three-dimensional modeling and printing technologies from medical images to analyze femoral head fractures using finite element analysis | Çıklacandır, Samet; Mihçin, Şenay ; İşler, Yalçın |
2022 | Determination of activation energy for carbon/epoxy prepregs containing carbon nanotubes by differential scanning calorimetry | Uz, Yusuf Can; Tanoğlu, Metin |
Jun-2014 | Determination of kozeny constant based on porosity and pore to throat size ratio in porous medium with rectangular rods | Özgümüş, Türküler; Mobedi, Moghtada ; Özkol, Ünver |
2021 | Determination of the material model and damage parameters of a carbon fiber reinforced laminated epoxy composite for high strain rate planar compression | Shi, C.; Guo, B.; Sarıkaya, Mustafa; Çelik, Muhammet; Chen, P.; Güden, Mustafa |
Apr-2017 | Determining the complexity of multi-component conformal systems: A platoon-based approach | Koşun, Çağlar; Özdemir, Serhan |
2018 | Developing polymer composite-based leaf spring systems for automotive industry | Öztoprak, Nahit; Güneş, Mehmet Deniz; Tanoğlu, Metin ; Aktaş, Engin ; Eğilmez, Oğuz Özgür ; Şenocak, Çiler; Kulaç, Gediz |
2021 | Development and analysis of composite overwrapped pressure vessels for hydrogen storage | Kartav, Osman ; Kangal, Serkan ; Yücetürk, Kutay ; Tanoğlu, Metin ; Aktaş, Engin ; Artem, Hatice Seçil |
2013 | Development and mechanical behavior of FML/aluminium foam sandwiches | Baştürk, Suat Bahar; Tanoğlu, Metin |
Nov-2022 | Development of a force sensor for biomechanical simulations of a cycling activity | Karacaoğlu, Bilal; Şahin, Ahmet Mert; Çıklaçandır, Samet; Yılmaz, Mehmet; Mihçin, Şenay |
2015 | Development of a new universal inverse through-flow program and method for fully coupled split-flow turbomachinery systems | Acarer, Sercan; Özkol, Ünver |
2010 | Development of an R-CUBE based general purpose haptic device system | Bilgincan, Tunç ; Dede, Mehmet İsmet Can |
2019 | Development of composite drive shaft tube for automotive industry | Arslan Özgen, Gizem; Tanoğlu, Metin ; Aktaş, Engin ; Yücetürk, Kutay |
Jun-2013 | Development of electrically conductive and anisotropic gel-coat systems using CNTs | İnce Yardımcı, Atike; Tanoğlu, Metin ; Selamet, Yusuf |
Jun-2018 | Development of graphene nanoplatelet-reinforced AZ91 magnesium alloy by solidification processing | Kandemir, Sinan |
2016 | Development of graphene nanoplatelets reinforced aluminium matrix nanocomposites by a combination of semi-solid stirring and ultrasonic treatment | Kandemir, Sinan ; Aydoğan, Yücel |
Jul-2017 | Development of MR-fluid based semi-active dampers to be used in haptic devices | Karabulut, Mehmet Görkem |
May-2009 | Development of novel multilayer materials for impact applications: A combined numerical and experimental approach | Taşdemirci, Alper ; Hall, Ian W. |
2004 | Development of Si-O-C based ceramic matrix composites produced via pyrolysis of a polysiloxane | Akkaş, Hatice Deniz; Öveçoğlu, M. L.; Tanoğlu, Metin |
2023 | Development of the Johnson-Cook flow stress and damage parameters for the impact response of polycarbonate: Experimental and numerical approach | Sarıkaya, Mustafa; Güden, Mustafa ; Kambur, Çağdaş; Çankaya Özbek, Sevim; Taşdemirci, Alper |
2008 | Diatom frustule-filled epoxy: Experimental and numerical study of the quasi-static and high strain rate compression behavior | Taşdemirci, Alper ; Yüksel, Sinan; Karsu, Deniz; Gültürk, Elif; Hall, Ian W.; Güden, Mustafa |
2022 | Digital twin of a servo driver of a servo motor as a first step towards a digital twin of a robot mechanism | Küçükoğlu, Sefa Furkan ; Carbone, Giuseppe; Dede, Mehmet İsmet Can |
2023 | Digital twin of electric vehicle battery systems: Comprehensive review of the use cases, requirements, and platforms | Naseri, Farshid; Gil, S.; Barbu, C.; Çetkin, Erdal ; Yarımca, Gülşah; Jensen, A. C.; Larsen, P. G.; Gomes, Claudio |
Jul-2011 | A dimensionless analysis of heat and mass transport in an adsorber with thin fins; uniform pressure approach | Gediz İliş, Gamze; Mobedi, Moghtada ; Ülkü, Semra |
2007 | A distributed behavioral model for landmine detection robots | Bayram, Çağdaş; Sevil, Hakkı Erhan; Özdemir, Serhan |
Sep-2006 | District heating system design for a university campus | Yıldırım, Nurdan ; Toksoy, Macit ; Gökçen Akkurt, Gülden |
2003 | District heting system of IZTECH Campus and its integration to the existing system | Yıldırım, Nurdan |
14-Jun-2015 | Düzlemsel iki serbestlik dereceli mekanizmaların en küçük kareler toplamı yöntemi ile işlev sentezi | Kiper, Gökhan ; Bağdadioğlu, Barış; Alizade, Rasim I. |
22-May-2017 | Düzlemsel yüzeyde çalışan lazer işleme makinası | Sığırtmaç, Tayfun; Kiper, Gökhan ; Dede, Mehmet İsmet Can |
2016 | Dynamic behavior predictions of fiber-metal laminate/aluminum foam sandwiches under various explosive weights | Baştürk, Suat Bahar; Tanoğlu, Metin ; Çankaya, Mehmet Alper; Eğilmez, Oğuz Özgür |
Jul-2023 | Dynamic computational wear model of PEEK-on-XLPE bearing couple in total hip replacements | Alpkaya, Alican Tuncay ; Mihçin, Şenay |
Jun-2015 | Dynamic crushing and energy absorption of sandwich structures with combined geometry shell cores | Taşdemirci, Alper ; Kara, Ali ; Turan, Kıvanç; Şahin, Selim |
Nov-2018 | Dynamic crushing behavior of a multilayer thin-walled aluminum corrugated core: The effect of velocity and imperfection | Sarıyaka, Mustafa; Taşdemirci, Alper ; Güden, Mustafa |
1998 | Dynamic properties of metal matrix composites: A comparative study | Güden, Mustafa ; Hall, Ian W. |
2021 | Dynamic Test and Modelling Laboratory | Güden, Mustafa ; Taşdemirci, Alper |
2003 | Dynamics of metal foam deformation during Taylor cylinder–Hopkinson bar impact experiment | Lopatnikov, Sergey L.; Gama, Bazle A.; Haque, Jahirul; Krauthauser, Carl; Gillespie, John W.; Güden, Mustafa ; Hall, Ian W. |
Sep-2006 | Economic assessment of geothermal district heating systems: A case study of Balçova-Narlıdere, Turkey | Erdoğmuş, Berkan; Toksoy, Macit ; Özerdem, Barış ; Aksoy, Niyazi |
Jul-2011 | Economical assessment of different HVAC systems for an operating room: Case study for different Turkish climate regions | Özyoğurtçu, Gamze; Mobedi, Moghtada ; Özerdem, Barış |
2004 | Effect of adhesive on the strengthening of aluminum foam-filled circular tubes | Toksoy, Ahmet Kaan; Tanoğlu, Metin ; Güden, Mustafa ; Hall, Ian W. |
2007 | Effect of aluminum closed-cell foam filling on the quasi-static axial crush performance of glass fiber reinforced polyester composite and aluminum/composite hybrid tubes | Güden, Mustafa ; Yüksel, Sinan; Taşdemirci, Alper ; Tanoğlu, Metin |
2013 | Effect of an inserted porous layer located at a wall of a parallel plate channel on forced convection heat transfer | Uçar, Eren; Mobedi, Moghtada ; Pop, Ioan |
2015 | Effect of an inserted porous layer on heat and fluid flow in a vertical channel with mixed convection | Çelik, Hasan; Mobedi, Moghtada |
Jul-2008 | Effect of aspect ratio on entropy generation in a rectangular cavity with differentially heated vertical walls | Gediz İliş, Gamze; Mobedi, Moghtada ; Sunden, Bengt |
2009 | Effect of blending conditions on the properties of EPDM/organoclay nanocomposites | Karşal, Çiçek; Tanoğlu, Metin ; Odabaş, Sibel; Ersoy, Osman G.; Karakaya, Nursel |
Dec-2017 | The effect of cavities and T-shaped assembly of fins on overall thermal resistances | Çetin, Eylem; Çetkin, Erdal |
2021 | The effect of cell wall material strain and strain-rate hardening behaviour on the dynamic crush response of an aluminium multi-layered corrugated core | Güden, Mustafa ; Canbaz, İlker |
2020 | Effect of CNT incorporation on PAN/PPy nanofibers synthesized by electrospinning method | İnce Yardımcı, Atike; Tanoğlu, Metin ; Yılmaz, Selahattin ; Selamet, Yusuf |
Feb-2018 | The effect of cooling on mechanical and thermal stresses in vascular structures | Çetkin, Erdal |
2019 | Effect of electric field on interfacial thermal resistance between silicon and water at nanoscales | Yenigün, Onur; Barışık, Murat |
Oct-2005 | Effect of geometrical parameters on heat transfer and pressure drop characteristics of plate fin and tube heat exchangers | Erek, Aytunç; Özerdem, Barış ; Bilir, Levent; İlken, Zafer |
1-Mar-2016 | Effect of heat treatment on the blast loading response of combined geometry shell core sandwich structures | Taşdemirci, Alper ; Kara, Ali ; Turan, Kıvanç; Şahin, Selim; Güden, Mustafa |
2011 | Effect of isotherm shape on mass transfer in an adsorbent particle; An isothermal adsorption process | Yıldırım, Zeynep Elvan; Gediz İliş, Gamze; Mobedi, Moghtada ; Ülkü, Semra |
May-2019 | Effect of nano-film thickness on thermal resistance at water/silicon interface | Yenigün, Onur; Barışık, Murat |
2010 | The effect of nitric acid surface treatment on CaP deposition of Ti6Al4V open-cell foams in SBF solution | Türkan, Uğur; Güden, Mustafa |
2008 | Effect of non-condensable gases on geothermal power plant performance. Case study: Kızıldere Geothermal Power Plant-Turkey | Gökçen Akkurt, Gülden ; Yıldırım, Nurdan |
Dec-2016 | The effect of perforations on the stress wave propagation characteristics of multilayered materials | Taşdemirci, Alper ; Kara, Ali |
Jun-2018 | Effect of polyamide-6,6 (PA 66) nonwoven veils on the mechanical performance of carbon fiber/epoxy composites | Beylergil, Bertan ; Tanoğlu, Metin ; Aktaş, Engin |
Jan-2015 | Effect of pore to throat size ratio on interfacial heat transfer coefficient of porous media | Özgümüş, Türküler; Mobedi, Moghtada |
Jun-2016 | Effect of pore to throat size ratio on thermal dispersion in porous media | Özgümüş, Türküler; Mobedi, Moghtada |
Apr-2016 | Effect of regeneration temperature on adsorption equilibria and mass diffusivity of zeolite 13x-water pair | Sayılgan, Şefika Çağla; Mobedi, Moghtada ; Ülkü, Semra |
2020 | The effect of single-walled carbon nanotube (SWCNT) concentration on the mechanical and rheological behavior of epoxy matrix | Ay, Z.; Tanoğlu, Metin |
2017 | The effect of spatial interventions on historic buildings' indoor climate (Case Study: Tire Necip Paşa Library, Izmir-Turkey) | Coşkun, Turgay ; Gülhan, Özcan; Şahin, Cem Doğan ; Durmuş Arsan, Zeynep ; Gökçen Akkurt, Gülden |
2020 | Effect of storage tanks on solar-powered absorption chiller cooling system performance | Toprak, Kasım ; Ouedraogo, Kiswendsida Elias |
2023 | The effect of strain rate on the compression behavior of additively manufactured short carbon fiber-reinforced polyamide composites with different layer heights, infill patterns, and built angles | Zeybek, Mehmet Kaan ; Güden, Mustafa ; Taşdemirci, Alper |
2003 | Effect of strain rate on the compression behaviour of a woven fabric S2-glass fiber reinforced vinyl ester composite | Akil, Övünç; Yıldırım, Uygar; Güden, Mustafa ; Hall, Ian W. |
2004 | Effect of strain rate on the compression behaviour of a woven glass fiber/SC-15 composite | Güden, Mustafa ; Yıldırım, Uygar; Hall, Ian W. |
2008 | The effect of strain rate on the compressive deformation behavior of a sintered Ti6Al4V powder compact | Taşdemirci, Alper ; Hızal, Alpay; Altındiş, Mustafa; Hall, Ian W.; Güden, Mustafa |
2006 | Effect of strain rate on the compressive mechanical behavior of a continuous alumina fiber reinforced ZE41A magnesium alloy based composite | Güden, Mustafa ; Akil, Övünç; Taşdemirci, Alper ; Çiftçioğlu, Muhsin ; Hall, Ian W. |
2012 | The effect of strain rate on the mechanical behavior of Teflon foam | Taşdemirci, Alper ; Turan, Ali Kıvanç; Güden, Mustafa |