Show simple item record

dc.contributor.authorUğurlu Sağın, Elif
dc.contributor.authorBöke, Hasan
dc.contributor.authorAras, Nadir
dc.contributor.authorYalçın, Şerife
dc.date.accessioned2017-05-15T07:05:21Z
dc.date.available2017-05-15T07:05:21Z
dc.date.issued2012-06
dc.identifier.citationUğurlu Sağın, E., Böke, H., Aras, N. and Yalçın, Ş. (2012). Determination of CaCO 3 and SiO 2 content in the binders of historic lime mortars. Materials and Structures/Materiaux et Constructions, 45(6), 841-849. doi:10.1617/s11527-011-9802-1en_US
dc.identifier.issn1359-5997
dc.identifier.urihttp://dx.doi.org/10.1617/s11527-011-9802-1
dc.identifier.urihttp://hdl.handle.net/11147/5498
dc.description.abstractThe binders of historic mortars composed of small grain sized silica (SiO 2) and carbonated lime (CaCO 3) are considered as the main part that give hydraulic character and high strength to the mortar. In this study, FTIR, SEM-EDS, LIBS and XRD spectroscopy were used to find out the weight ratios of CaCO 3 to SiO 2 in the binders of historic lime mortars. For this purpose, a series of pure calcium carbonate and silica mixture were prepared in ten combinations in varying ratios from 0.5 to 5. Calibration curve was prepared for each analysis by plotting the peak area or intensity ratios of CaCO 3 to SiO 2 versus the weight ratios of CaCO 3 to SiO 2. A good linear correlation coefficient was obtained for each analysis respectively. The analyses were then tested on the binder of the Roman mortar samples. The results indicated that FTIR, SEM-EDS and LIBS spectroscopy are convenient tools to determine the weight ratios of CaCO 3 to SiO 2 in the binders of mortars. But XRD spectroscopy is not convenient for quantitative analysis of binders due to the presence of varied amounts of amorphous or poor crystalline silica in their compositions.en_US
dc.language.isoengen_US
dc.publisherSpringeren_US
dc.relation.isversionof10.1617/s11527-011-9802-1en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectBinderen_US
dc.subjectCalciteen_US
dc.subjectFTIRen_US
dc.subjectHistoric mortaren_US
dc.subjectLIBSen_US
dc.subjectSEM-EDSen_US
dc.titleDetermination of CaCO 3 and SiO 2 content in the binders of historic lime mortarsen_US
dc.typearticleen_US
dc.contributor.authorIDTR130858en_US
dc.contributor.authorIDTR2086en_US
dc.contributor.authorIDTR57067en_US
dc.contributor.authorIDTR114593en_US
dc.contributor.institutionauthorUğurlu Sağın, Elif
dc.contributor.institutionauthorBöke, Hasan
dc.contributor.institutionauthorAras, Nadir
dc.contributor.institutionauthorYalçın, Şerife
dc.relation.journalMaterials and Structures/Materiaux et Constructionsen_US
dc.contributor.departmentIzmir Institute of Technology. Architectural Restorationen_US
dc.identifier.volume45en_US
dc.identifier.issue6en_US
dc.identifier.startpage841en_US
dc.identifier.endpage849en_US
dc.identifier.wosWOS:000303354100004
dc.identifier.scopusSCOPUS:2-s2.0-84861639784
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record