Browsing by Author "Wang, Yannan"

Now showing 1 - 2 of 2

Citation - WoS: 3
Citation - Scopus: 5
Numerical Study of Fluid Flow and Mixing in the Argon Oxygen Decarburization (aod) Process
(Iron and Steel Institute of Japan, 2023) Cheng, Zhongfu; Wang, Yannan; Dutta, Abhishek; Blanpain, Bart; Guo, Muxing; Malfliet, Annelies; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
A three-dimensional (3D) model has been developed based on the Eulerian multiphase flow approach to investigate the fluid flow behavior and mixing efficiency in the multi-tuyere AOD process. The interphase forces, including drag force, lift force, virtual force, turbulent dispersion force, and wall lubrication force, were incorporated into this model. The model was used to simulate six-tuyere and seven-tuyere AOD processes. The phenomena of multi-jet penetration, bubble plume merging, 3D turbulent flow and mixing characteristics were considered. The results indicate that the bubble plume merging occurs in the upper part of the liquid bath, forming a typical plume cluster. The predicted penetration length for a single tuyere jet agrees well with the previous work. For the multi-jet system, the side jets penetrate deeper than the inside ones. The six-tuyere AOD has a good flow condition in the center of the liquid bath, while the seven-tuyere AOD has a better flow pattern in the sidewall region and the lower bath. Overall, the seven-tuyere AOD performs better in mixing efficiency than the six-tuyere AOD under the same gas flow rate. These findings increase the understanding of the AOD process, allowing further optimization of process parameters. This model can be further extended to incorporate the thermochemical reactions into the modeling of the AOD reactor.
Numerical Study on the Mixing Characteristics in the Argon Oxygen Decarburization Process
(Association for Iron and Steel Technology, AISTECH, 2022) Cheng, Zhongfu; Wang, Yannan; Dutta, Abhishek; Blanpain, Bart; Guo, Muxing; Malfliet, Annelies; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
The argon-oxygen decarburization (AOD) process is a crucial refining method in modern stainless steel production. It has been widely used to remove C in the past few decades [1, 2]. The AOD converter can provide excellent mixing conditions through turbulent stirring using submerged tuyeres. In the AOD process, the flow characteristics in the bath have a significant influence on the mass transport, momentum exchange and heat transfer, which are closely linked with the gas-metal reaction kinetics and the refining efficiency. A deep understanding of jet behavior, bubble flow characteristics and mixing efficiency facilitates further optimization of the decarburization and desulfurization operations. This will increase the AOD productivity and lower its energy and material consumption as well as the manufacturing cost.