Search
Now showing items 1-10 of 10
The increased compression strength of an epoxy resin with the addition of heat-treated natural nano-structured diatom frustules
(SAGE Publications, 2017-05)
Natural diatom frustules composing nanometer size silica particles were heat-treated at temperatures between 600 and 1200℃ for 2 h and used as filler/reinforcing agent (15 wt%) in an epoxy resin. The opal structure of ...
High strain rate deformation behavior of a continuous fiber reinforced aluminum metal matrix composite
(Elsevier, 2000)
An aluminum metal matrix composite reinforced with continuous unidirectional α-Al2O3 fibers has been compression tested at quasi-static and dynamic strain rates. In the transverse direction, the composite showed increased ...
Effect of strain rate on the compression behavior of a woven glass fiber/SC-15 composite
(Elsevier, 2004)
Strain rate dependent compression behavior of a plain-weave S-2 glass fabric SC-15 epoxy (rubber toughened resin) composite plate, currently studied as the backing plate for composite armor applications, was determined in ...
Experimental and numerical studies on the quasi-static and dynamic crushing responses of multi-layer trapezoidal aluminum corrugated sandwiches
(Elsevier, 2014-05)
The axial crushing responses of bonded and brazed multi-layer 1050 H14 trapezoid alaluminum corru-
gated core (fin) sandwich structures, with and without aluminum interlayer sheets in 0°/0° and 0°/90° core orientations, ...
Experimental investigation of interaction effects in foam-filled thin-walled aluminum tubes
(Springer, 2006)
The interaction coefficients of polystyrene foam filling of thin-walled aluminum cylindrical tubes were investigated experimentally through compression testing of partially foam-filled tubes with and without adhesive. The ...
Mechanical interlocking between porous electrospun polystyrene fibers and an epoxy matrix
(American Chemical Society, 2014)
An epoxy matrix filled with nonwoven mats of porous polystyrene (PS) fibers processed by an electrospinning was compression tested at quasi-static (1 × 10–3 s–1) and high strain (315 s–1) rates. The electrospun PS fibers ...
Effect of strain rate on the compressive mechanical behavior of a continuous alumina fiber reinforced ZE41A magnesium alloy based composite
(Elsevier, 2006)
The compressive mechanical response of an FP™ continuous fiber (35 vol.%) Mg composite has been determined in the transverse and longitudinal directions at quasi-static and high strain rates. It was found that the composite ...
Effect of strain rate on the compression behaviour of a woven fabric S2-glass fiber reinforced vinyl ester composite
(Elsevier, 2003)
Quasi-static (~10−3s−1) and high strain rate (>500 s−1) compression behavior of an S2-glass woven fabric/vinyl ester composite plate was determined in the in-plane and through-thickness directions. In both directions, ...
Diatom frustule-filled epoxy: Experimental and numerical study of the quasi-static and high strain rate compression behavior
(Elsevier, 2008)
In this study, centric type diatom frustules obtained from a diatomaceous earth filter material were used as filler in an epoxy resin with a weight percentage of 15% in order to assess the possible effects on the compressive ...
Effects of compaction pressure and particle shape on the porosity and compression mechanical properties of sintered Ti6Al4V powder compacts for hard tissue implantation
(Wiley Periodicals, Inc., 2007)
Sintered Ti6Al4V powder compacts potentially to be used in implant applications were prepared using commercially available spherical and angular powders (100-200 mum) within the porosity range of 34-54%. Cylindrical green ...
