Browsing Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection by Department "İYTE, Mühendislik Fakültesi, Makina Mühendisliği Bölümü"
Now showing items 1-20 of 165
-
Airfoil optimization for noise emission problem and aerodynamic performance criterion on small scale wind turbines
(Elsevier, 2012-10)Noise emission is one of the major concerns in wind turbine industry and especially for small scale wind turbines, which are mostly erected to the urban areas; the concern is turning into a problem. This paper focuses on ... -
Alternating error effects on decomposition method in function generation synthesis
(Springer, 2017)In approximate function generation synthesis methods, error between the desired function’s output and designed mechanism’s output oscillate about zero error while crossing the zero error margin at precision points. The ... -
Analysis and application of advanced control strategies to a heating element nonlinear model
(IOP Publishing, 2017-01)This paper presents the design of different control strategies applied to a heating element nonlinear model. The description of this heating element was obtained exploiting a data-driven and physically meaningful nonlinear ... -
Analytical solution of micro-/nanoscale convective liquid flows in tubes and slits
(Springer, 2017-09)Analytical solutions examining heat transport in micro-/nanoscale liquid flows were developed. Using the energy equation coupled with fully developed velocity, we solved developing temperature profiles with axial conduction ... -
Analytical solution of thermally developing microtube heat transfer including axial conduction, viscous dissipation, and rarefaction effects
(Elsevier, 2015-10)The solution of extended Graetz problem for micro-scale gas flows is performed by coupling of rarefaction, axial conduction and viscous dissipation at slip flow regime. The analytical coupling achieved by using Gram-Schmidt ... -
Antimicrobial activity of TiO2-coated orthodontic ceramic brackets against Streptococcus mutans and Candida albicans
(Springer, 2010-08)Polycrystalline alumina ceramic orthodontic brackets were coated with anatase TiO2 film via a sol-gel dip-coating method. The surface structure morphology and composition of the films were evaluated via scanning electron ... -
The ARROWS project: Adapting and developing robotics technologies for underwater archaeology
(Elsevier, 2015-05)ARchaeological RObot systems for the World's Seas (ARROWS) EU Project proposes to adapt and develop low-cost Autonomous Underwater Vehicle (AUV) technologies to significantly reduce the cost of archaeological operations, ... -
Assessment of elliptic flame front propagation characteristics of iso-octane, gasoline, M85 and E85 in an optical engine
(Elsevier, 2014-03)Premixed fuel-air flame propagation is investigated in a single-cylinder, spark-ignited, four-stroke optical test engine using high-speed imaging. Circles and ellipses are fitted onto image projections of visible light ... -
Atomic density effects on temperature characteristics and thermal transport at grain boundaries through a proper bin size selection
(American Institute of Physics Publishing, 2016-05-21)This study focuses on the proper characterization of temperature profiles across grain boundaries (GBs) in order to calculate the correct interfacial thermal resistance (ITR) and reveal the influence of GB geometries onto ... -
Ballistic behavior of high hardness perforated armor plates against 7.62 mm armor piercing projectile
(Elsevier, 2014)In this paper, some of the important defeating mechanisms of the high hardness perforated plates against 7.62 x 54 armor piercing ammunition were investigated. The experimental and numerical results identified three ... -
Buckling optimization of composite laminates using a hybrid algorithm under Puck failure criterion constraint
(SAGE Publications, 2016-08-01)In this study, an optimization procedure is proposed to find the optimum stacking sequence designs of laminated composite plates in different fiber angle domains for maximum buckling resistance. A hybrid algorithm combining ... -
Calcined and natural frustules filled epoxy matrices: The effect of volume fraction on the tensile and compression behavior
(Elsevier, 2013-01)The effects of calcined diatom (CD) and natural diatom (ND) frustules filling (0–12 vol.%) on the quasistatic tensile and quasi-static and high strain rate compression behavior of an epoxy matrix were investigated ... -
Classification of manipulators of the same origin by virtue of compactness and complexity
(Elsevier, 2011-10)This work deals with a classification method that employs concepts such as complexity and compactness. The idea is to classify manipulators, or any other mechanism for that matter, of the same origin, based on the geometry ... -
A closed-form solution of spatial sliders for rigid-body guidance
(Springer, 2013-10-16)This paper presents a closed-form solution to the four-position synthesis problem by using a spatial slider, which is a spatial dyad of two perpendicularly intersected cylindrical joints. We utilize the dialytic elimination ... -
A comment on change of Nusselt number sign in a channel flow filled by a fluid-saturated porous medium with constant heat flux boundary conditions
(Springer, 2013-01)The aim of this Letter is to show that, the Nusselt number sign might be changed without changing of heat transfer direction at the wall of channels, even for flows without viscous dissipation. The sign of the Nusselt ... -
Comparative study of a building energy performance software (KEP-IYTE-ESS) and ANN-based building heat load estimation
(Elsevier, 2014-12)The several parameters affect the heat load of a building; geometry, construction, layout, climate and the users. These parameters are complex and interrelated. Comprehensive models are needed to understand relationships ... -
Comparison of stochastic search optimization algorithms for the laminated composites under mechanical and hygrothermal loadings
(SAGE Publications, 2011-07)The aim of the present study is to design the stacking sequence of the laminated composites that have low coefficient of thermal expansion and high elastic moduli. In design process, multi-objective genetic algorithm ... -
Comparison of uniform and non-uniform pressure approaches used to analyze an adsorption process in a closed type adsorbent bed
(Springer, 2013)Heat and mass transfer in an annular adsorbent bed filled with silica gel particles is numerically analyzed by uniform and non-uniform pressure approaches. The study is performed for silica gel-water pair, particle radius ... -
Computing the safe working zone of a 3-RRS parallel manipulator
(Springer, 2017)Determination of the safe working zone (SWZ) of a parallel manipulator is a one-time computational task with several permanent benefits. As this subspace of the workspace of the manipulator is free of both the loss- and ... -
Constructal microdevice manifold design with uniform flow rate distribution by consideration of the tree-branching rule of Leonardo da Vinci and Hess-Murray rule
(American Society of Mechanical Engineers, 2017-08)In this paper, we show how the design of a microdevice manifold should be tapered for uniform flow rate distribution. The designs based on the tree-branching rule of Leonardo da Vinci and the Hess-Murray rule were considered ...
