Show simple item record

dc.contributor.authorBeylergil, Bertan
dc.contributor.authorAktaş, Alaattin
dc.contributor.authorPekbey, Yeliz
dc.date.accessioned2017-04-12T08:36:48Z
dc.date.available2017-04-12T08:36:48Z
dc.date.issued2013-05
dc.identifier.citationBeylergil, B., Aktaş, A., and Pekbey, Y. (2013). Enhancement of flexural performance of wood beams using textile fabrics. Science and Engineering of Composite Materials, 20(2), 195-202. doi:10.1515/secm-2012-0102en_US
dc.identifier.issn0334-181X
dc.identifier.urihttp://doi.org/10.1515/secm-2012-0102
dc.identifier.urihttp://hdl.handle.net/11147/5292
dc.description.abstractThe aim of this study was to investigate the flexural performance of wood beams (beech - Fagus orientalis Lipsky) reinforced with woven and selected weft knitted glass fabrics, namely, Milano and plain knit. Some physical and mechanical properties of the beech wood and the textile fabrics were determined in accordance with relevant ASTM standards. Twenty-four wood beams which have two different cross sections (I-shaped and square hollow) were manufactured and tested under a threepoint load. They were divided into two groups: Group A specimens were not reinforced to serve as a reference, whereas Group B specimens were reinforced with textile fabrics combined with adhesion. The flexural behavior of the specimens was studied through their load-deflection characteristics. The modes of failure were identified and categorized. The experimental results showed that the load-bearing capacity of reinforced beams increased significantly compared to the beam without reinforcement. This method can be used to repair and strengthen damaged wood beams.en_US
dc.language.isoengen_US
dc.publisherDe Gruyteren_US
dc.relation.isversionof10.1515/secm-2012-0102en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectFlexural performanceen_US
dc.subjectKnittingen_US
dc.subjectWooden_US
dc.subjectFabrics/textilesen_US
dc.subjectWeavingen_US
dc.titleEnhancement of flexural performance of wood beams using textile fabricsen_US
dc.typearticleen_US
dc.contributor.authorIDTR51518en_US
dc.contributor.institutionauthorBeylergil, Bertan
dc.relation.journalScience and Engineering of Composite Materialsen_US
dc.contributor.departmentİYTE, Mühendislik Fakültesi, Makina Mühendisliği Bölümüen_US
dc.identifier.volume20en_US
dc.identifier.issue2en_US
dc.identifier.startpage195en_US
dc.identifier.endpage202en_US
dc.identifier.wosWOS:000318224100014
dc.identifier.scopusSCOPUS:2-s2.0-84879093677
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record