Show simple item record

dc.contributor.authorTeomete, Egemen
dc.date.accessioned2017-03-16T08:50:11Z
dc.date.available2017-03-16T08:50:11Z
dc.date.issued2011
dc.identifier.citationTeomete, E. (2011). Effect of process parameters on surface quality for wire saw cutting of alumina ceramic. Gazi University Journal of Science, 24(2), 291-297.en_US
dc.identifier.issn1303-9709
dc.identifier.urihttp://hdl.handle.net/11147/5074
dc.description.abstractSilicon wafers are sliced using wire saw in micro electronics and photo voltaic industries. Wire saw process occupies a great portion of silicon wafer production cost which affects the market directly. The process is also used to cut ceramics, concrete and rocks in civil engineering. The high cost of the process motivates researchers to develop models that will relate the process efficiency and quality with process parameters. In this study, an experimental parametric study was conducted to investigate the effect of process parameters on the wire bow angle, distributed wire load and surface roughness in wire saw cutting of alumina ceramic. The material removal and surface damage formation mechanisms are identified. Process design recommendations for increasing efficiency of the process while keeping the surface roughness constant, are presented. The surface roughness increases with increasing feed rate, decreases with wire speed and is independent of wire tension. The material is removed by trans-granular failure of the grains while inter-granular fractures of the grains affect the surface quality.en_US
dc.language.isoengen_US
dc.publisherGazi Universityen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectSurface roughnessen_US
dc.subjectCeramicen_US
dc.subjectDuctile regime machiningen_US
dc.subjectWire sawen_US
dc.titleEffect of process parameters on surface quality for wire saw cutting of alumina ceramicen_US
dc.typearticleen_US
dc.contributor.authorIDTR101234en_US
dc.contributor.institutionauthorTeomete, Egemen
dc.relation.journalGazi University Journal of Scienceen_US
dc.contributor.departmentİYTE, Mühendislik Fakültesi, İnşaat Mühendisliği Bölümüen_US
dc.identifier.volume24en_US
dc.identifier.issue2en_US
dc.identifier.startpage291en_US
dc.identifier.endpage297en_US
dc.identifier.scopusSCOPUS:2-s2.0-79959385866
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record