Search
Now showing items 1-10 of 21
High strain rate deformation behavior of a continuous fiber reinforced aluminum metal matrix composite
(Elsevier, 2000)
An aluminum metal matrix composite reinforced with continuous unidirectional α-Al2O3 fibers has been compression tested at quasi-static and dynamic strain rates. In the transverse direction, the composite showed increased ...
High strain rate properties of an SiCw/2124-T6 aluminum composite at elevated temperatures
(Elsevier, 1998-07)
Metal matrix composites, (MMC’s) provide several important advantages over unreinforced metals and alloys. Among these, higher moduli and yield stresses and enhanced thermo-mechanical properties are normally considered ...
High strain rate testing of a unidirectionally reinforced graphite epoxy composite
(Kluwer Academic Publishers, 2001-05)
Since accurate, reproducible methods of testing polymer composites are not very well developed or standardized, this research forms part of a program to gain a better understanding of the mechanical properties and failure ...
Effect of strain rate on the compression behavior of a woven glass fiber/SC-15 composite
(Elsevier, 2004)
Strain rate dependent compression behavior of a plain-weave S-2 glass fabric SC-15 epoxy (rubber toughened resin) composite plate, currently studied as the backing plate for composite armor applications, was determined in ...
Split Hopkinson Pressure Bar compression testing of an aluminum alloy: Effect of lubricant type
(Kluwer Academic Publishers, 2003)
The Split Hopkinson Pressure Bar (SHPB), or Kolsky Bar, is widely used for studying the dynamic mechanical properties of metals and other materials. A cylindrical specimen is sandwiched between the incident and transmitter ...
High strain-rate compression testing of a short-fiber reinforced aluminum composite
(Elsevier, 1997)
Compression behavior of 15–26 Vf% Saffil™ short-fiber reinforced Al-1.17wt.%Cu alloy metal matrix composites has been determined over a strain-rate range of approximately 10−4 to 2×103 s−1. The strain-rate sensitivity of ...
Mechanical interlocking between porous electrospun polystyrene fibers and an epoxy matrix
(American Chemical Society, 2014)
An epoxy matrix filled with nonwoven mats of porous polystyrene (PS) fibers processed by an electrospinning was compression tested at quasi-static (1 × 10–3 s–1) and high strain (315 s–1) rates. The electrospun PS fibers ...
Effect of strain rate on the compressive mechanical behavior of a continuous alumina fiber reinforced ZE41A magnesium alloy based composite
(Elsevier, 2006)
The compressive mechanical response of an FP™ continuous fiber (35 vol.%) Mg composite has been determined in the transverse and longitudinal directions at quasi-static and high strain rates. It was found that the composite ...
Effect of strain rate on the compression behaviour of a woven fabric S2-glass fiber reinforced vinyl ester composite
(Elsevier, 2003)
Quasi-static (~10−3s−1) and high strain rate (>500 s−1) compression behavior of an S2-glass woven fabric/vinyl ester composite plate was determined in the in-plane and through-thickness directions. In both directions, ...
SiC-partikül takviyeli alüminyum metal matrisli kompozitin statik ve yüksek hız deformasyon davranışının modellenmesi
(Pamukkale Üniversitesi, 2002)
SiC-partikül 2024 Al matrisli Metal Matris Kompozitin yüksek deformasyon hızlarındaki mekanik davranışı sonlu elemanlar metodu ile modellenmiştir. Modelde viskoplastik matris ve küresel partikülden oluşan eksenel simetrik ...
