Now showing items 1-5 of 5
Mechanical interlocking between porous electrospun polystyrene fibers and an epoxy matrix
(American Chemical Society, 2014)
An epoxy matrix filled with nonwoven mats of porous polystyrene (PS) fibers processed by an electrospinning was compression tested at quasi-static (1 × 10–3 s–1) and high strain (315 s–1) rates. The electrospun PS fibers ...
Split Hopkinson pressure bar multiple reloading and modeling of a 316 L stainless steel metallic hollow sphere structure
The high strain rate (600 s−1) compression deformation of a 316 L metallic hollow sphere (MHS) structure (density: 500 kg m−3; average outer hollow sphere diameter: 2 mm and wall thickness: 45 μm) was determined both ...
Modeling quasi-static and high strain rate deformation and failure behavior of a (±45) symmetric E-glass/polyester composite under compressive loading
Quasi-static (1 × 10−3–1 × 10−2 s−1) and high strain rate (∼1000 s−1) compressive mechanical response and fracture/failure of a (±45) symmetric E-glass/polyester composite along three perpendicular directions were determined ...
Experimental testing and full and homogenized numerical models of the low velocity and dynamic deformation of the trapezoidal aluminium corrugated core sandwich
(Wiley Publishing, 2014-06)
The simulations of the low velocity and dynamic deformation of a multi-layer 1050-H14 Al trapezoidal zig-zag corrugated core sandwich were investigated using the homogenized models (solid models) of a single core layer ...
Experimental and numerical investigation of high strain rate mechanical behavior of a [0/45/90/ - 45] quadriaxial E-Glass/Polyester composite
Quasi-static (10−3–10−1 s−1) and high strain rate (∼900 s−1) compression behavior of an E-Glass fiber woven fabric reinforced Polyester matrix composites was investigated by using a Shimadzu AG-I testing machine and a Split ...