Show simple item record

dc.contributor.authorElbir, Semih
dc.contributor.authorYılmaz, Selahattin
dc.contributor.authorToksoy, Ahmet Kaan
dc.contributor.authorGüden, Mustafa
dc.contributor.authorHall, Ian W.
dc.date.accessioned2015-12-18T10:01:30Z
dc.date.available2015-12-18T10:01:30Z
dc.date.issued2003
dc.identifier.citationElbir, S., Yılmaz, S., Toksoy, A. K., Güden, M., and Hall, I. W. (2003). SiC-particulate aluminum composite foams produced by powder compacts: Foaming and compression behavior. Journal of Materials Science, 38(23), 4745-4755. doi: 10.1023/A:1027427102837en_US
dc.identifier.urihttp://doi.org/10.1023/A:1027427102837
dc.identifier.urihttp://hdl.handle.net/11147/4408
dc.description.abstractThe foaming behavior of SiC-particulate (8.6% by volume) aluminum composite powder compacts contained Titanium Hydride blowing agent was investigated by heating above the melting temperature (750°C) in a pre-heated furnace. Aluminum powder compacts were also prepared and foamed using similar compaction and foaming parameters in order to determine the effect of SiC-particulate addition on foaming and compression behavior. The linear expansions of the compacts at various furnace holding times were ex situ determined. Optical and scanning electron microscopy techniques were used to characterize prepared and deformed foams microstructures. The SiC-particulate addition was found to increase the linear expansion and reduce the extent of the liquid metal drainage and cell coarsening of the aluminum compacts. The composite foam samples also showed higher compressive stresses, but a more brittle behavior as compared with aluminum foams.en_US
dc.description.sponsorshipTÜBİTAK for the grant #MISAG-135en_US
dc.language.isoengen_US
dc.publisherKluwer Academic Publishersen_US
dc.relation.isversionof10.1023/A:1027427102837en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAluminum foamen_US
dc.subjectCompression testen_US
dc.subjectComposite materialsen_US
dc.subjectTitanium Hydrideen_US
dc.titleSiC-particulate aluminum composite foams produced by powder compacts: Foaming and compression behavioren_US
dc.typearticleen_US
dc.contributor.authorIDTR22592en_US
dc.contributor.authorIDTR114738en_US
dc.contributor.institutionauthorElbir, Semih
dc.contributor.institutionauthorYılmaz, Selahattin
dc.contributor.institutionauthorToksoy, Ahmet Kaan
dc.contributor.institutionauthorGüden, Mustafa
dc.relation.journalJournal of Materials Scienceen_US
dc.contributor.departmentIzmir Institute of Technology. Mechanical Engineeringen_US
dc.contributor.departmentIzmir Institute of Technology. Chemical Engineeringen_US
dc.identifier.volume38en_US
dc.identifier.issue23en_US
dc.identifier.startpage4745en_US
dc.identifier.endpage4755en_US
dc.identifier.wosWOS:000186420800012
dc.identifier.scopusSCOPUS:2-s2.0-0347622336
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record