Show simple item record

dc.contributor.authorGüden, Mustafa
dc.contributor.authorYüksel, Sinan
dc.date.accessioned2015-12-18T09:30:36Z
dc.date.available2015-12-18T09:30:36Z
dc.date.issued2006-07
dc.identifier.citationGüden, M, and Yüksel, S. (2006). SiC-particulate aluminum composite foams produced from powder compacts: foaming and compression behavior. Journal of Materials Science, 41(13), 4075-4084. doi: 10.1007/s10853-006-7645-xen_US
dc.identifier.urihttp://doi.org/10.1007/s10853-006-7645-x
dc.identifier.urihttp://hdl.handle.net/11147/4407
dc.description.abstractThe foaming behavior of SiC-particulate (SiCp) aluminum composite powder compacts containing titanium hydride blowing agent was investigated by heating to 750°C in a pre-heated furnace. Aluminum powder compacts were also prepared and foamed using similar compaction and foaming parameters in order to determine the effect of SiCp-addition on the foaming and compression behavior. The SiCp-addition (10 wt%) was found to increase the linear expansion of the Al powder compacts presumably by increasing the surface as well as the bulk viscosities. The compression tests conducted on Al and 10 and 20% SiCp foams further showed a more brittle compression behavior of SiCp/Al foams as compared with Al foams. The collapse stresses of Al and 10% SiCp/Al foams were also predicted using the equations developed for the open and closed cell foams. Predictions have shown that Al foam samples behaved similar to open cell foams, while 10% SiCp/Al foam collapse stress values were found between those of open and closed cell foams, biasing towards those of the open cell foams.en_US
dc.description.sponsorshipTÜBİTAK for the grant #MISAG-227en_US
dc.language.isoengen_US
dc.publisherSpringeren_US
dc.relation.isversionof10.1007/s10853-006-7645-xen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAluminum foamen_US
dc.subjectComposite materialsen_US
dc.subjectCompression testen_US
dc.titleSiC-particulate aluminum composite foams produced from powder compacts: foaming and compression behavioren_US
dc.typearticleen_US
dc.contributor.authorIDTR114738en_US
dc.contributor.institutionauthorGüden, Mustafa
dc.contributor.institutionauthorYüksel, Sinan
dc.relation.journalJournal of Materials Scienceen_US
dc.contributor.departmentIzmir Institute of Technology. Mechanical Engineeringen_US
dc.identifier.volume41en_US
dc.identifier.issue13en_US
dc.identifier.startpage4075en_US
dc.identifier.endpage4084en_US
dc.identifier.wosWOS:000239282300014
dc.identifier.scopusSCOPUS:2-s2.0-33747103147
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record