Show simple item record

dc.contributor.authorKarsu, Nurettin Deniz
dc.contributor.authorYüksel, Sinan
dc.contributor.authorGüden, Mustafa
dc.date.accessioned2015-12-08T12:22:14Z
dc.date.available2015-12-08T12:22:14Z
dc.date.issued2009
dc.identifier.citationKarsu, N. D., Yüksel, S. & Güden, M. (2009). Foaming behavior of Ti6Al4V particle-added aluminum powder compacts. Journal of Materials Science, 44(6), 1494-1505. doi: 10.1007/s10853-008-3039-6en_US
dc.identifier.urihttp://doi.org/10.1007/s10853-008-3039-6
dc.identifier.urihttp://hdl.handle.net/11147/4372
dc.description.abstractThe foaming behavior of 5 wt.% Ti6Al4V (Ti64) particle (30–200 μm)-added Al powder compacts was investigated in order to assess the particle-addition effects on the foaming behavior. Al compacts without particle addition were also prepared with the same method and foamed. The expansions of Ti64 particle-added compacts were measured to be relatively low at small particle sizes and increased with increasing particle size. At highest particle size range (160–200 μm), particle-added compacts showed expansion behavior similar to that of Al compacts without particle addition, but with lower expansion values. Expansions studies on 30–45 μm size Ti64-added compacts with varying weight percentages showed that the expansion behavior of the compacts became very similar to that of Al compact when the particle content was lower than 2 wt.%. However, Ti64 addition reduced the extent of drainage. Ti64 particles and TiAl3 particles formed during foaming increased the apparent viscosity of the liquid foam and hence reduced the flow of liquid metal from cell walls to plateau borders. The reduced foamability in the compacts with the smaller size Ti64 addition was attributed to the relatively high viscosities, due to the higher cumulative surface area of the particles and higher rate of TiAl3 formation between liquid Al and Ti64 particles.en_US
dc.description.sponsorshipTÜBİTAK for the grant #106M186en_US
dc.language.isoengen_US
dc.publisherSpringeren_US
dc.relation.isversionof10.1007/s10853-008-3039-6en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectFoamed materialsen_US
dc.subjectAluminum foamen_US
dc.subjectTi6Al4Ven_US
dc.titleFoaming behavior of Ti6Al4V particle-added aluminum powder compactsen_US
dc.typearticleen_US
dc.contributor.authorIDTR114738en_US
dc.contributor.institutionauthorKarsu, Nurettin Deniz
dc.contributor.institutionauthorYüksel, Sinan
dc.contributor.institutionauthorGüden, Mustafa
dc.relation.journalJournal of Materials Scienceen_US
dc.contributor.departmentIzmir Institute of Technology. Mechanical Engineeringen_US
dc.identifier.volume44en_US
dc.identifier.issue6en_US
dc.identifier.startpage1494en_US
dc.identifier.endpage1505en_US
dc.identifier.wosWOS:000264265100011
dc.identifier.scopusSCOPUS:2-s2.0-62649084112
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record