Show simple item record

dc.contributor.authorŞakar‐Deliormanlı, Aylin
dc.contributor.authorÇelik, Erdal
dc.contributor.authorPolat, Mehmet
dc.date.accessioned2016-10-20T12:59:23Z
dc.date.available2016-10-20T12:59:23Z
dc.date.issued2008-12
dc.identifier.citationŞakar‐Deliormanlı, A., Çelik, E., and Polat, M. (2008). Thermal analysis and microstructural characterization of ceramic green tapes prepared by aqueous tape casting. Journal of Thermal Analysis and Calorimetry, 94(3), 663-667. doi:10.1007/s10973-008-9364-9en_US
dc.identifier.issn1388-6150
dc.identifier.urihttp://doi.org/10.1007/s10973-008-9364-9
dc.identifier.urihttp://hdl.handle.net/11147/2296
dc.description.abstractIn this study, aqueous lead magnesium niobate (PMN) slurry formulations were developed for tape casting using a poly(acrylic acid) - poly(ethylene) oxide comb polymer as the dispersant, nonionic acrylic latex as the binder phase and hydroxypropyl methylcellulose as the wetting agent. Concentrated suspensions were cast onto a silicone-coated mylar film, and the effect of acrylic latex on deposition was investigated. Thermal analyses were performed to investigate the mass loss of the green tapes as a function of calcination temperature. Differential scanning calorimetric analyses were made under air and nitrogen atmospheres to investigate the binder distribution through the green tapes. Results showed that it is possible to prepare flexible, crack free PMN thick films using a proper slurry composition in the presence of acrylic latex binder, without using any plasticizer. Additionally, decomposing mechanisms of the acrylic based binder were essentially different in the two atmospheres.en_US
dc.description.sponsorshipTÜBİTAKen_US
dc.language.isoengen_US
dc.publisherSpringeren_US
dc.relation.isversionof10.1007/s10973-008-9364-9en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAcrylic latexen_US
dc.subjectMagnesium castingsen_US
dc.subjectLead magnesium niobateen_US
dc.subjectTape castingen_US
dc.titleThermal analysis and microstructural characterization of ceramic green tapes prepared by aqueous tape castingen_US
dc.typearticleen_US
dc.contributor.authorIDTR6637en_US
dc.contributor.authorIDTR20247en_US
dc.contributor.institutionauthorŞakar-Deliormanlı, Aylin
dc.contributor.institutionauthorÇelik, Erdal
dc.contributor.institutionauthorPolat, Mehmet
dc.relation.journalJournal of Thermal Analysis and Calorimetryen_US
dc.contributor.departmentIzmir Institute of Technology. Chemical Engineeringen_US
dc.identifier.volume94en_US
dc.identifier.issue3en_US
dc.identifier.startpage663en_US
dc.identifier.endpage667en_US
dc.identifier.wosWOS:000261832000012
dc.identifier.scopusSCOPUS:2-s2.0-57849103984
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record