Show simple item record

dc.contributor.authorAydın, Çiğdem
dc.contributor.authorÖzerdem, Barış
dc.date.accessioned2016-10-13T08:58:27Z
dc.date.available2016-10-13T08:58:27Z
dc.date.issued2006-03
dc.identifier.citationAydın, Ç., and Özerdem, B. (2006). Air leakage measurement and analysis in duct systems. Energy and Buildings, 38(3), 207-213. doi:10.1016/j.enbuild.2005.05.010en_US
dc.identifier.issn0378-7788
dc.identifier.urihttp://doi.org/10.1016/j.enbuild.2005.05.010
dc.identifier.urihttp://hdl.handle.net/11147/2229
dc.description.abstractAir ducts and related equipments are used in a large number of buildings having thermal comfort. In this study, energy loss related with air leakage is studied. The leakage measurement setup was produced according to NEN-EN standards and the evaluation of data have been conducted by using power law model. The measurements were made on 300 and 1000 mm diameter single circular ducts, 300 mm × 250 mm and 1000 mm × 500 mm flanged joint rectangular ducts, 300 and 630 mm diameter circular beaded slip joint ducts, 300 mm × 200 mm and 500 mm × 300 mm rectangular flanged and drive slip joint ducts, and an branched air distribution system having different diameters for positive internal pressures. Test results have showed that the most of air leakage is from the joints. The seam contribution to air leakage is relatively lower than the joints. Using sealing gaskets help to improve the air leakage by about 50%.en_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.relation.isversionof10.1016/j.enbuild.2005.05.010en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectLeakage (fluid)en_US
dc.subjectAir distribution systemen_US
dc.subjectAir leakageen_US
dc.subjectDuct sealingen_US
dc.subjectPower law modelen_US
dc.titleAir leakage measurement and analysis in duct systemsen_US
dc.typearticleen_US
dc.contributor.authorIDTR10614en_US
dc.contributor.iztechauthorAydın, Çiğdem
dc.contributor.iztechauthorÖzerdem, Barış
dc.relation.journalEnergy and Buildingsen_US
dc.contributor.departmentIzmir Institute of Technology. Mechanical Engineeringen_US
dc.identifier.volume38en_US
dc.identifier.issue3en_US
dc.identifier.startpage207en_US
dc.identifier.endpage213en_US
dc.identifier.wosWOS:000234534700006
dc.identifier.scopusSCOPUS:2-s2.0-29144462528
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record