Show simple item record

dc.contributor.authorKurt, Emrah
dc.contributor.authorÖzçelik, Cenk Yağız
dc.contributor.authorYetgin, Senem
dc.contributor.authorÖzmıhçı Ömürlü, Filiz
dc.contributor.authorBalköse, Devrim
dc.date.accessioned2019-10-30T13:27:53Z
dc.date.available2019-10-30T13:27:53Z
dc.date.issued2013en_US
dc.identifier.citationKurt, E., Özçelik, C. Y., Yetgin, S., Özmıhçı Ömürlü, F., and Balköse, D. (2013). Preparation and characterization of flexible polyvinylchloride-copper composite films. Polymers and Polymer Composites, 21(3), 139-144.en_US
dc.identifier.issn0967-3911
dc.identifier.urihttps://hdl.handle.net/11147/7320
dc.description.abstractFlexible PVC films are statically charged due to their low electrical conductivity. This creates fire threat during its handling. Conductive materials are added to films to prevent this. In the present study it was aimed to prepare PVC- copper composite films by sol gel technique and characterize the prepared films. It was aimed to increase the electrical conductivity of the films by adding copper powder. However, the copper particles settled down to bottom instead of forming a conductive network that covers the whole cross section. Thus at the film crosssection a plastic upper phase and a copper rich lower phase were present. The film did not conduct electricity due to this uneven distribution. The minimum volumetric and surface resistivities of the films were at the order of 109 ohm-cm and 1010 ohm square respectively.en_US
dc.language.isoengen_US
dc.publisherSmithers Rapra Technologyen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectConductivityen_US
dc.subjectCopper powderen_US
dc.subjectPVCen_US
dc.subjectStatic electricityen_US
dc.titlePreparation and characterization of flexible polyvinylchloride-copper composite filmsen_US
dc.typearticleen_US
dc.contributor.institutionauthorKurt, Emrah
dc.contributor.institutionauthorÖzçelik, Cenk Yağız
dc.contributor.institutionauthorYetgin, Senem
dc.contributor.institutionauthorÖzmıhçı Ömürlü, Filiz
dc.contributor.institutionauthorBalköse, Devrim
dc.relation.journalPolymers and Polymer Compositesen_US
dc.contributor.departmentIzmir Institute of Technology. Chemical Engineeringen_US
dc.identifier.volume21en_US
dc.identifier.issue3en_US
dc.identifier.startpage139en_US
dc.identifier.endpage144en_US
dc.identifier.wosWOS:000324846300004
dc.identifier.scopusSCOPUS:2-s2.0-84881267068
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record