Now showing items 1-5 of 5
The effect of strain rate on the mechanical behavior of Teflon foam
The quasi-static (1 × 10−3, 1 × 10−2 and 1 × 10−1 s−1) and high strain rate (7200 and 9500 s−1) experimental and high strain rate numerical compression deformation of a Gore Polarchip™ CP7003 heat insulating Teflon foam ...
The impact responses and the finite element modeling of layered trapezoidal corrugated aluminum core and aluminum sheet interlayer sandwich structures
The impact responses of brazed and adhesively bonded layered 1050 H14 trapezoidal corrugated aluminum core and aluminum sheet interlayer sandwich panels with 3003 and 1050 H14 aluminum alloy face sheets were investigated ...
The effect of the interlayer on the ballistic performance of ceramic/composite armors: Experimental and numerical study
The effect of rubber, Teflon and aluminum foam interlayer material on the ballistic performance of composite armor was investigated both experimentally and numerically. Although, rubber interlayer did not cause any significant ...
Split Hopkinson pressure bar multiple reloading and modeling of a 316 L stainless steel metallic hollow sphere structure
The high strain rate (600 s−1) compression deformation of a 316 L metallic hollow sphere (MHS) structure (density: 500 kg m−3; average outer hollow sphere diameter: 2 mm and wall thickness: 45 μm) was determined both ...
Modeling quasi-static and high strain rate deformation and failure behavior of a (±45) symmetric E-glass/polyester composite under compressive loading
Quasi-static (1 × 10−3–1 × 10−2 s−1) and high strain rate (∼1000 s−1) compressive mechanical response and fracture/failure of a (±45) symmetric E-glass/polyester composite along three perpendicular directions were determined ...