Search
Now showing items 1-10 of 10
High strain rate reloading compresson testing of a closed-cell alumnum foam
(The European Association for Experimental Mechanics, 2007)
Aluminum (Al) closed-cell foams are materials of increasing importance because they have good energy absorption capabilities combined with good thermal and acoustic properties. They can convert much of the impact energy ...
Kauçuk/Metal yapışma mukavemetinin belirlenmesi
(Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi, 2005)
EPDM (ethylene-propylene-diene terpolymer) kauçuğunun metale yapışma mukavemetine, metal yüzey pürüzlülüğünün ve kullanılan yapıştırıcı cinsinin etkisi araştırılmıştır. Farklı dolgu oranlarında üretilen 5 tip EPDM kauçuğunun ...
SiC-Vıskır/Alüminyum kompozit köpüklerin hazırlanması ve mekanik özelliklerinin belirlenmesi
(Pamukkale Üniversitesi, 2004)
Köpükleştirici TiH2 içeren SiC-viskır/Al kompozit tabletler erime sıcaklığının üzerinde ısıtılarak köpükleşme davranışları belirlenmiştir. SiC-vıskır katkısının köpükleşme ve mekanik özelliklere (basma) etkisini belirlemek ...
Split Hopkinson Pressure Bar compression testing of an aluminum alloy: Effect of lubricant type
(Kluwer Academic Publishers, 2003)
The Split Hopkinson Pressure Bar (SHPB), or Kolsky Bar, is widely used for studying the dynamic mechanical properties of metals and other materials. A cylindrical specimen is sandwiched between the incident and transmitter ...
SiC-particulate aluminum composite foams produced by powder compacts: Foaming and compression behavior
(Kluwer Academic Publishers, 2003)
The foaming behavior of SiC-particulate (8.6% by volume) aluminum composite powder compacts contained Titanium Hydride blowing agent was investigated by heating above the melting temperature (750°C) in a pre-heated furnace. ...
Compression testing of a sintered Ti6Al4V powder compact for biomedical applications
(Elsevier, 2005)
In this study, the compression deformation behavior of a Ti6Al4V powder compact, prepared by the sintering of cold compacted atomized spherical particles (100–200 Am) and containing 36–38% porosity, was investigated at ...
SiC-particulate aluminum composite foams produced from powder compacts: foaming and compression behavior
(Springer, 2006-07)
The foaming behavior of SiC-particulate (SiCp) aluminum composite powder compacts containing titanium hydride blowing agent was investigated by heating to 750°C in a pre-heated furnace. Aluminum powder compacts were also ...
Predicting energy absorption in a foam-filled thin-walled aluminum tube based on experimentally determined strengthening coefficient
(Elsevier, 2006)
The energy absorption in a foam-filled thin-walled circular Al tube was investigated based on the experimentally determined strengthening coefficient of filling using Al and polystyrene closed-cell foams with three different ...
Processing and compression testing of Ti6Al4V foams for biomedical applications
(Springer, 2009)
Open cell Ti6Al4V foams (60% porosity) were prepared at sintering temperatures between 1,200 and 1,350 °C using ammonium bicarbonate particles (315–500 μm) as space holder. The resulting cellular structure of the foams ...
The effect of strain rate on the compressive deformation behavior of a sintered Ti6Al4V powder compact
(Elsevier, 2008)
The high strain rate (220–550 s−1) and quasi-static (0.0016 s−1) compression deformation behavior of a sintered Ti6Al4V powder compact was investigated. The compact was prepared using atomized spherical particles (100–200 ...
