Show simple item record

dc.contributor.authorNane, O.
dc.contributor.authorÖzçelik, Bekir
dc.contributor.authorAbukay, Doğan
dc.date.accessioned2017-04-03T06:55:24Z
dc.date.available2017-04-03T06:55:24Z
dc.date.issued2013-06
dc.identifier.citationNane, O., Özçelik, B., and Abukay, D. (2013). The effects of the post-annealing temperature on the growth mechanism of Bi2Sr2Ca1Cu2O8+ ∂ thin films produced on MgO (1 0 0) single crystal substrates by pulsed laser deposition (PLD). Journal of Alloys and Compounds, 566, 175-179. doi:10.1016/j.jallcom.2013.03.054en_US
dc.identifier.issn0925-8388
dc.identifier.urihttps://doi.org/10.1016/j.jallcom.2013.03.054
dc.identifier.urihttp://hdl.handle.net/11147/5193
dc.description.abstractThe effects of post-annealing temperature were investigated on Bi 2Sr2Ca1Cu2O8+ ∂ thin films deposited on MgO (1 0 0) substrates by pulsed laser deposition (PLD). The structural and superconducting properties of the films have been determined by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), temperature dependent resistivity (R-T), and DC magnetization measurements. The films which were deposited at 600 C were post-annealed in an atmosphere of a gas mixture of Ar (93%) and O2 (7%), at temperature ranging between 800 and 880 C. This resulted in films which exhibited a single phase of 2212 with a high crystallinity (FWHM ≈ 0.16) and texturing along the c-axis, perpendicular to the plane of the substrate. An optimum temperature of 860 C was found for the post-annealing thermal treatment. The critical temperature, TC, of the films was measured as 82 K and the critical current density, JC, was calculated as 3 × 107 A/cm2 for the film annealed at 860 C.en_US
dc.description.sponsorshipResearch Fund of Cukurova University (FEF2011D20)en_US
dc.language.isoengen_US
dc.publisherElsevieen_US
dc.relation.isversionof10.1016/j.jallcom.2013.03.054en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectBi-2212 thin filmen_US
dc.subjectCritical current densityen_US
dc.subjectMagnetic hysteresisen_US
dc.subjectPost-annealingen_US
dc.subjectAtmospheric temperatureen_US
dc.titleThe effects of the post-annealing temperature on the growth mechanism of Bi2Sr2Ca1Cu2O8+ ∂ thin films produced on MgO (1 0 0) single crystal substrates by pulsed laser deposition (PLD)en_US
dc.typearticleen_US
dc.contributor.iztechauthorAbukay, Doğan
dc.relation.journalJournal of Alloys and Compoundsen_US
dc.contributor.departmentİYTE, Fen Fakültesi, Fizik Bölümüen_US
dc.identifier.volume566en_US
dc.identifier.startpage175en_US
dc.identifier.endpage179en_US
dc.identifier.wosWOS:000317817200029
dc.identifier.scopusSCOPUS:2-s2.0-84875932862


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record