Now showing items 21-26 of 26
Stress wave propagation effects in two- and three-layered composite materials
(SAGE Publications, 2004)
Multilayer materials consisting of ceramic and glass/epoxy composites have been subjected to high strain rate compression testing using the Split Hopkinson Pressure Bar. The samples were extensively strain gaged so that ...
The effect of the interlayer on the ballistic performance of ceramic/composite armors: Experimental and numerical study
The effect of rubber, Teflon and aluminum foam interlayer material on the ballistic performance of composite armor was investigated both experimentally and numerically. Although, rubber interlayer did not cause any significant ...
Calcined and natural frustules filled epoxy matrices: The effect of volume fraction on the tensile and compression behavior
The effects of calcined diatom (CD) and natural diatom (ND) frustules filling (0–12 vol.%) on the quasistatic tensile and quasi-static and high strain rate compression behavior of an epoxy matrix were investigated ...
The effect of strain rate on the compressive deformation behavior of a sintered Ti6Al4V powder compact
The high strain rate (220–550 s−1) and quasi-static (0.0016 s−1) compression deformation behavior of a sintered Ti6Al4V powder compact was investigated. The compact was prepared using atomized spherical particles (100–200 ...
Effect of aluminum closed-cell foam filling on the quasi-static axial crush performance of glass fiber reinforced polyester composite and aluminum/composite hybrid tubes
The effect of Al closed-cell foam filling on the quasi-static crushing behavior of an E-glass woven fabric polyester composite tube and thin-walled Al/polyester composite hybrid tube was experimentally investigated. For ...
Diatom frustule-filled epoxy: Experimental and numerical study of the quasi-static and high strain rate compression behavior
In this study, centric type diatom frustules obtained from a diatomaceous earth filter material were used as filler in an epoxy resin with a weight percentage of 15% in order to assess the possible effects on the compressive ...