Now showing items 1-4 of 4
Diatom frustule-filled epoxy: Experimental and numerical study of the quasi-static and high strain rate compression behavior
In this study, centric type diatom frustules obtained from a diatomaceous earth filter material were used as filler in an epoxy resin with a weight percentage of 15% in order to assess the possible effects on the compressive ...
Effect of strain rate on the compressive mechanical behavior of a continuous alumina fiber reinforced ZE41A magnesium alloy based composite
The compressive mechanical response of an FP™ continuous fiber (35 vol.%) Mg composite has been determined in the transverse and longitudinal directions at quasi-static and high strain rates. It was found that the composite ...
Mechanical interlocking between porous electrospun polystyrene fibers and an epoxy matrix
(American Chemical Society, 2014)
An epoxy matrix filled with nonwoven mats of porous polystyrene (PS) fibers processed by an electrospinning was compression tested at quasi-static (1 × 10–3 s–1) and high strain (315 s–1) rates. The electrospun PS fibers ...
Experimental and numerical studies on the quasi-static and dynamic crushing responses of multi-layer trapezoidal aluminum corrugated sandwiches
The axial crushing responses of bonded and brazed multi-layer 1050 H14 trapezoid alaluminum corru- gated core (fin) sandwich structures, with and without aluminum interlayer sheets in 0°/0° and 0°/90° core orientations, ...