Show simple item record

dc.contributor.authorErgün, Yelda
dc.contributor.authorDirier, C.
dc.contributor.authorTanoğlu, Metin
dc.date.accessioned2016-06-06T10:19:33Z
dc.date.available2016-06-06T10:19:33Z
dc.date.issued2004-11
dc.identifier.citationErgün, Y., Dirier, C., and Tanoğlu, M. (2004). Polymethyl methacrylate based open-cell porous plastics for high-pressure ceramic casting. Materials Science and Engineering A, 385(1-2), 279-285. doi:10.1016/j.msea.2004.07.014en_US
dc.identifier.issn0921-5093
dc.identifier.urihttp://doi.org/10.1016/j.msea.2004.07.014
dc.identifier.urihttp://hdl.handle.net/11147/4722
dc.description.abstractThe aim of the present study is to investigate the microstructure-property relation in polymethyl methacrylate (PMMA)-based porous mould materials used for high-pressure casting of ceramic articles. For this purpose, porous plastic materials were produced by the polymerization of water-in-oil emulsions with various compositions of emulsion constituents and particle sizes of the filler PMMA beads. Pore morphology, porosity and water permeability of the materials were measured. The compressive stress-strain behavior, collapse stress and elastic modulus values of the macroporous materials were determined by performing compressive mechanical testing. Fracture toughness values of the materials were also measured using the single-edge notched bending method. The results showed that the concentration of emulsion constituents and PMMA bead sizes has significant effects on the pore morphology, porosity, water permeability and mechanical properties of the porous plastics.en_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.relation.isversionof10.1016/j.msea.2004.07.014en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectCeramic castingen_US
dc.subjectPolymethyl methacrylateen_US
dc.subjectPorous plasticsen_US
dc.subjectCollapse stressen_US
dc.subjectWater-in-oil emulsionsen_US
dc.titlePolymethyl methacrylate based open-cell porous plastics for high-pressure ceramic castingen_US
dc.typearticleen_US
dc.contributor.authorIDTR30837en_US
dc.contributor.iztechauthorErgün, Yelda
dc.contributor.iztechauthorTanoğlu, Metin
dc.relation.journalMaterials Science and Engineering Aen_US
dc.contributor.departmentİYTE, Mühendislik Fakültesi, Makina Mühendisliği Bölümüen_US
dc.identifier.volume385en_US
dc.identifier.issue1-2en_US
dc.identifier.startpage279en_US
dc.identifier.endpage285en_US
dc.identifier.wosWOS:000224822000035
dc.identifier.scopusSCOPUS:2-s2.0-7244256113
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record