Show simple item record

dc.contributor.authorTürkan, Uğur
dc.contributor.authorGüden, Mustafa
dc.date.accessioned2015-12-17T13:09:23Z
dc.date.available2015-12-17T13:09:23Z
dc.date.issued2010
dc.identifier.citationTürkan, U., and Güden, M. (2010). The effect of surface treatment on CaP deposition of Ti6Al4V open cell foams in SBF solution. Ceramics International, 36(6), 1805-1816. doi:10.1016/j.ceramint.2010.03.030en_US
dc.identifier.urihttp://doi.org/10.1016/j.ceramint.2010.03.030
dc.identifier.urihttp://hdl.handle.net/11147/4402
dc.description.abstractThe effects of alkali and nitric acid surface treatment and acid etching on the CaP deposition of an open cell Ti6Al4V foam (60% porous and 300–500 μm in pore size) developed for biomedical applications were investigated in a simulated body fluid (SBF) solution for 14-day. The surface roughness of the foam specimens ground flat surfaces was measured in nano-metric scale before and after SBF immersion using an atomic force microscope (AFM). A significant increase in the surface roughness of alkali treated foam specimen after SBF immersion indicated a smaller crystal size CaP deposition, which was also confirmed by the AFM micrographs. The microscopic evaluation clearly showed that alkali treatment and nitric acid treatment induced a continuous, uniform CaP deposition on the cell wall surfaces of the foam (interior of cells). While in untreated foam specimen the cells are filled with CaP precipitates and acid etching did not produce a continuous coating layer on particles interior of the cells. The coating layer thickness was ∼3 μm in alkali treated foam specimens after 14-day of SBF immersion, while nitric acid treatment induced relatively thinner coating layer, 0.6 μm.en_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.relation.isversionof10.1016/j.ceramint.2010.03.030en_US
dc.relation.urihttp://hdl.handle.net/11147/5036
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectFilmsen_US
dc.subjectSurfacesen_US
dc.subjectApatiteen_US
dc.subjectBiomedical applicationsen_US
dc.titleThe effect of surface treatment on CaP deposition of Ti6Al4V open cell foams in SBF solutionen_US
dc.typearticleen_US
dc.contributor.authorIDTR123910en_US
dc.contributor.authorIDTR114738en_US
dc.contributor.iztechauthorTürkan, Uğur
dc.contributor.iztechauthorGüden, Mustafa
dc.relation.journalCeramics Internationalen_US
dc.contributor.departmentİYTE, Mühendislik Fakültesi, Makina Mühendisliği Bölümüen_US
dc.identifier.volume36en_US
dc.identifier.issue6en_US
dc.identifier.startpage1805en_US
dc.identifier.endpage1816en_US
dc.identifier.wosWOS:000280027800008
dc.identifier.scopusSCOPUS:2-s2.0-77954085862
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record