Show simple item record

dc.contributor.authorKara, Ali
dc.contributor.authorTaşdemirci, Alper
dc.contributor.authorGüden, Mustafa
dc.date.accessioned2015-12-11T08:06:24Z
dc.date.available2015-12-11T08:06:24Z
dc.date.issued2013
dc.identifier.citationKara, A., Taşdemirci, A., and Güden, M. (2013). Modeling quasi-static and high strain rate deformation and failure behavior of a (±45) symmetric E-glass/polyester composite under compressive loading. Materials & Design, 49, 566-574. doi:10.1016/j.matdes.2013.01.002en_US
dc.identifier.urihttp://doi.org/10.1016/j.matdes.2013.01.002
dc.identifier.urihttp://hdl.handle.net/11147/4389
dc.description.abstractQuasi-static (1 × 10−3–1 × 10−2 s−1) and high strain rate (∼1000 s−1) compressive mechanical response and fracture/failure of a (±45) symmetric E-glass/polyester composite along three perpendicular directions were determined experimentally and numerically. A numerical model in LS-DYNA 971 using material model MAT_162 was developed to investigate the compression deformation and fracture of the composite at quasi-static and high strain rates. The compressive stress–strain behaviors of the composite along three directions were found strain rate sensitive. The modulus and maximum stress of the composite increased with increasing strain rate, while the strain rate sensitivity in in-plane direction was higher than that in through-thickness direction. The damage progression determined by high speed camera in the specimens well agreed with that of numerical model. The numerical model successfully predicted the damage initiation and progression as well as the failure modes of the composite.en_US
dc.description.sponsorshipTÜBİTAK for the Grant # 106M353en_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.relation.isversionof10.1016/j.matdes.2013.01.002en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectHigh strain rateen_US
dc.subjectComposite materialsen_US
dc.subjectLS-DYNAen_US
dc.subjectQuasi-staticen_US
dc.titleModeling quasi-static and high strain rate deformation and failure behavior of a (±45) symmetric E-glass/polyester composite under compressive loadingen_US
dc.typearticleen_US
dc.contributor.authorIDTR114512en_US
dc.contributor.authorIDTR114738en_US
dc.contributor.iztechauthorTaşdemirci, Alper
dc.contributor.iztechauthorGüden, Mustafa
dc.relation.journalMaterials & Designen_US
dc.contributor.departmentİYTE, Mühendislik Fakültesi, Makina Mühendisliği Bölümüen_US
dc.identifier.volume49en_US
dc.identifier.startpage566en_US
dc.identifier.endpage574en_US
dc.identifier.wosWOS:000318547000069
dc.identifier.scopusSCOPUS:2-s2.0-84874785046
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record